This video takes you through the installation of the Vertex Standard VX-350 software. The video is brought to you by the Two Way Radio Center. Programming Basics for the Vertex VX-350.

Vertex VX-351 or VX-354 Cloning Requires a CT-27A Radio-to-Radio Cable Adding a new Vertex Standard or radios to your existing fleet is a simple process with the built-in cloning feature. All you need is a Vertex cloning cable to transfer the programming information. A VX-351 will not clone to a VX-354 and all models must be identical using the same VHF or UHF band.

VX-350 Series Cloning is a 6 Step Procedure • Turn both radios OFF • Connect the CT-27 cloning cable between the MIC/SP jacks of the two radios. • Press and hold the “Side 1” key and the “PTT” key while turning the radio ON.

The LED will remain off and if a VX-354, it will display “ CLONE”. • Repeat step 3 on the other radio. • To switch the radio to receive data, press the “Side 1” key. Then the LED indicator will glow “ Green“. • To switch the radio to transmit data, press the “PTT” key. Then the LED indicator will glow “ Red“. When the data transfer is successful, the VX-354 display will return to “CLONE” or if a VX-351, the TX/BUSY indicator will turn off. You are now ready for the next radio or turn both radios off and disconnect the CT-27 cable.

Download rundll32exe windows 81. Jan 11, 2017  Hello Sharon, The Rundll32.exe is used to launch functionality stored in shared Dynamic-link library files or DLL.This is a valid part of Windows, and normally shouldn’t be a threat. To ensure that there's no missing or corrupted files from your computer, we suggest running a System File Checker tool.

You can then power on the radios and begin normal operation.